Machine: APQS Liberty, 12 foot table
Location: Acton, MA
Price: $9,500.00
Contact: savagegina@aol.com
This is a 2004 machine which lives in a non-smoking home with dogs who avoid my sewing room. It has been gently used, only for my own quilts, not for a business. Factory maintenance done in November 2009 and it runs like a dream! 12ï foot adjustable table, auto stitch regulator, 20 ½ throat size, automatic needle positioner, side clamps, laser light, mechanized fabric advance, new Edgerider wheels, bobbin winder, extra bobbin case, pre-wound bobbins, new canvas leaders, instruction manual & video, Hartley base expander, and Ruler Mate base expander (different shapes). A binder which as has several years of tips, tricks, troubleshooting and other helpful information compiled from the APQS forum. Really helpful! Buyer pays shipping; I have original boxes. I am happy to help with getting it to you as inexpensively as possible, especially if you live in the northeast.
Posted 8-31-10     to be removed 3-3-11

Machine: Nolting 30 inch, 12 foot table
                   with Statler Stitcher
Location: Chelan, WA
Price: $19,500
Contact: brianfhicks@wildblue.net
Gently used 30 inch Nolting with Statler Stitcher 3.0 on 12 foot table. This machine has been a second machine and has had very little use, less than 250 hours and this machine runs like a dream. Machine can be used as a free-motion machine as well as computer guided machine. This system includes all computer components and monitor, a hydraulic lift system, stand alone bobbin winder, attached drawers, zipper leaders, laser light, 2 additional bobbin cases, 54 high quality bobbins (mostly bronze), and needles. This system is LOADED with patterns, including all of Shannon Hicks patterns sold through both OSNA and Piece and Joy Quilting websites. The price for this machine is $19,500, which is a real bargain for this gently used machine. To purchase this machine new, without the hydraulics, drawers, and many of the extras would cost you over $30,000. Purchaser is responsible for all transportation and delivery costs. Delivery and setup can be negotiated within 250 miles of Chelan, WA.
Posted 8-31-10     to be removed 3-3-11

Machine: Gammill Optimum, 12 foot table
                      with Statler Stitcher
Location: Sliver Spring, Maryland
Price: $28,500
Contact: Cissysews@aol.com
Beautiful pink, 2006 Statler Stitcher Optimum, lightly used with 12 foot table, full length light bar, hydraulic lift, swivel casters, pivot access, Kim Diamond's Heritage Collection. LOTS of thread, needles, etc. Chair with guide floor mat included. This machine has been updated by dealer with new ergo handles and smaller back cords, replacing the large bulky cords in the back of the machine. A custom thread rack on wheels that holds 96 cones of thread is included. Purchaser is responsible for all take down, transportation, shipping & delivery costs.
Posted 8-26-10   to be removed 2-16-11

Machine: Nolting 18, 12 foot table
Location: Bellefonte, PA
Price: $6,000
Contact: kathryn.miller@wellsfargo.com
Nolting 18 with newer 12 foot metal table with IntelliStitch stitch regulator, laser light, both side to side and front and back channel locking guides, lots of bobbins. Machine has been used only for my personal use, and has been very carefully maintained. I am making way for a bigger machine. Pictures are available upon request. Purchaser is responsible for pick up and all shipping costs.
Posted 8-26-10     to be removed 2-26-11

Machine: Gammill Classic Plus, 14 foot table
Location: Redmond, WA
Price: $10,000
Contact: rosemaryperez20@gmail.com
This is a very lightly used machine that I bought 7 years ago in 2003 and have about 80 hours of use on it. It is in pristine condition. It comes with a stitch regulator and bobbin winder. It has a portable laser light, Gam Guide and Circle Ease and swivel casters. I would throw in all my pantograph patterns and how-to videos. Also some cone thread and a box of 20 needles, a bottle of oil too. I would be able to disassemble the machine but you would have to arrange for pick-up, transportation and pay all shipping fees.
Posted 8-17-10    to be removed 2-17-11

Machine: Pfaff Hobby 1200 Grand Quilter,
                   10 foot table with Q-Bot
Location: Shelton, WA
Price: $6,000
Contact: arichter@hctc.com
This is a Pfaff machine is only one year old. It has a 9 inch arm and an Inspira carriage. The table is 10 feet long, aluminum and steel frame. I am upgrading to a different machine. The Q-Bot is a computerized option that quilts blocks and has been recently updated. Purchaser is responsible for machine take down, transportation and shipping fees .
Posted 8-17-10    to be removed 2-17-11

Machine: Gammill Classic Plus, 14 foot table
Location: Sidney, MT
Price: $10,750.00
Contact: flipside@midrivers.com
One owner, 2003 model with factory stitch-length regulator & manual stitching, laser light, pivotal-access table to accommodate king size quilts. Includes batting bar,  2 sets of zippered leaders, work station & laser-light patterns to aid in creating perfect circles, ovals & other designs. Extra bobbins, thread, set-up supplies & owners manual included. This Gammill runs beautifully. I'm reluctantly giving it up to have more time for family. Buyer is responsible for moving & set up. I can help make arrangements with Montana dealer to move machine, set up & give instructions, etc. if needed. Their fee would be in addition to the cost of the machine & the buyer's responsibility.
Posted 8-17-10    to be removed 2-17-11

Machine: Gammill Classic, 14 foot table
Location: Fresno, CA
Price: $8,000
Contact: benjamincharbour@gmail.com
Mom only quilted 3-4 quilts before getting ill. It's a 1999 model, which has sat idle for 8 years. It has been turned on, oiled, and runs great. It has the mounted laser light, a 24" throat, and is from what we've been told, an excellent machine. Purchaser is responsible for transportation and shipping fees.
Posted 8-17-10    to be removed 2-17-11

Machine: Gammill Premier, 12 foot table
Location: Mountain, WI
Price: $4,500
Contact: gina8035@gmail.com
This is a 1995 machine with the following upgrades: wheels, tension knob, micro stipple foot (for feathers and trapunto work), full fence foot, micro drivers, thread guides, foam handles, modified smooth glide carriage, zipper leaders, Gam Guide, stand-alone bobbin winder, castors, and more. Also includes needles, about 30 bobbins, some books, videos and A&E Signature 100% cotton thread to get you started in your new hobby or business adventure! This machine is loaded and ready to go with practice fabric for you. I will teach you in my home how to do free form feathers, McTavishing, and Edge 2 Edge Quilting. We can assist in moving the machine if you need help. Transportation can be arranged within 200 miles or so. If you are outside of this area, you are responsible for transportation and shipping costs. All offers will be considered.
Posted 7-8-10             To be removed 2-8-11

Machine: APQS Millennium, 14 foot table
Location:  Portage, IN
Price: $10.000
Contact: monakane@comcast.net
This is a 2006 machine, and includes base expander for thread cutter, Hartley Fence, laser light, 2 pantographs, APQS manual & Guide by Linda Taylor, zippers on leaders & 2 extra sets, needles & bobbins in several colors, perfect condition, only quilted 6 quilts. Purchaser is responsible for transportation and shipping fees.
Posted 7-8-10             To be removed 2-8-11

Gammill Premier, 10 foot table with Statler Stitcher
Location: Denver, CO
Price: $18,900
Contact: steve@quiltshop.us
Gammill Premier with Statler Stitcher, 10 foot table. Like new, personal use for 6 months. Machine has an 18 inch throat and includes zippered leaders, batting bar, and mounting kit for monitor, keyboard, mouse, CPU and controller. I am trading in for a larger machine. Delivery and training available within 200 miles. Purchaser is responsible for all take down, transportation, shipping & delivery costs.
Posted 7-27-10         to be removed 1-27-11

Machine: Royal Ken Quilt, 12 foot table
Location: Denver CO
Price: $7,999.00
Contact: steve@quiltshop.us
Gently used Royal Ken Quilt with 30 inch throat, IntelliStitch stitch regulator, and zippered leaders. Traded up for a Statler Stitcher. Training and delivery available within 200 miles. Purchaser is responsible for all take down, transportation, shipping & delivery costs.
Posted 7-27-10         to be removed 1-27-11

Machine: Gammill Optimum, 12 foot table,
                  with Statler Stitcher
Location: Vancouver, WA
Price: $25,000.00
Contact: moonstress@yahoo.com
2006 Statler Stitcher Optimum, 12 foot table, full length light bar ,hydraulic lift, swivel casters, excellent quality thread, (75 Cones) Kim Diamond's Heritage Collection, and 3 yrs of Ann Bright membership + others. Purchaser is responsible for all take down, transportation, shipping & delivery costs.
Posted 7-27-10         to be removed 1-27-11

Machine: APQS Millennium, 14 foot table
Location: Milo, Iowa
Price: $13,000
Contact: cmosher@crosspaths.net
My machine is gently used and well maintained. It features stitch length regulator, bobbin thread cutter, training video, laser light, channel locks, bobbin winder (one on machine and one separate piece) and Hartley Fence. Extras such as thread, bobbins, pantograph patterns, etc. are included. Purchaser is responsible for moving machine and all transportation, shipping, and delivery costs. The machine is located 25 miles SE of Des Moines, IA.
Posted 7-19-10           to be removed 1-19-11

Machine: Gammill Classic Plus , 14 foot table
Location: Chesapeake, VA
Price: $12,500
Contact: jdooling@cox.net
This wonderful quilting machine has had only one owner and has only 130 hours on it, hence it is still considered a new machine. It has a stitch regulator, portable laser light, Gam guide bars (for straight lines and cross-hatching) and circle ease for making perfect circles, fans and rainbows. The table is 14 feet long and will take a king size quilt. It also comes with swivel casters for easy moving. Gammill videos and instructional manuals are also provided. Interested buyers are responsible for their own pickup and setup.
Posted 7-15-10           to be removed 1-15-11

Machine: Gammill Optimum, 14 foot table with
                   Statler Stitcher
Location: Decatur, IL
Price: $27,000
Contact: phovey@springnet1.com
2006 Gammill Optimum with Statler Stitcher on 14ft table with light bar, swivel casters, several bobbins, two bobbin cases. Several patterns included. Purchaser is responsible for all take down, transportation, shipping, and delivery costs.
Posted 7-13-10           to be removed 1-13-11

Machine: APQS Millennium, 12 foot table
Location: Wake Forest, NC
Price: $14,900
Contact: WhateversQuilted@quiltslikecrazy.com
My gently used, top of the line stitch regulated Millie ($17,400) comes with nearly $2,600 in extras: the Hydraulic Table Lift ($1,500), stitch regulation, 12 foot table, bobbin thread cutter, power quilt advance, batting bar ($150), Large Base Expander ($125) and rulers, Microdrive handles ($199.95), Hartley Fence ($595) and circle maker, and nearly 100 bobbins. Purchaser is responsible for pick up, transportation, etc.
Posted 6-24-10    to be removed 12-24-10

Machine: #228 Nustyle, 12 foot table
Location: Abilene, KS
Price: $2,000.00
Contact: imnrn1216@yahoo.com
 Older Nustyle, recently serviced, runs smooth. Was my husbands, feels ready to move up. Last owner made her living on it. Included 10 bobbins, 10 needles, 10 large spools of thread, 10 pantograph patterns, laser, stylus. 12' sturdy wood table, doesn't bow, new wheels. Purchaser is responsible for transportation & delivery costs.
Posted 6-24-10    to be removed 12-24-10

Machine: HQ Sixteen with Pro-Stitcher,
                     5 1/2 to 11 foot table
Location: Post Falls, ID
Price: $13,000
Contact: snailzpace@hotmail.com
A 2004, completely upgraded HQ Sixteen with stitch regulator and the Pro-Stitcher which was added in 2008. Comes with the HQ Portable Professional Frame with a height adjustment up to 40", a separate high-speed bobbin winder, extra bobbins, extra needles. a stylus and adapter for groovy boards x 2, and laser light for following pantographs. This machine has also been outfitted with the most recent ergonomic handles, LED lighting, and the newest track wheels for the smoothest motion possible. Extras include a base expander, a tool caddy and a 3 x 12" ruler. This machine has only actually only quilted four quilts, none since the upgrade. I did set everything up and played with the Pro-Stitcher some, but then packaged it all back up to move. It is a beautiful set up, but life changes dictate it's time to sell it. Purchaser is responsible for transportation and delivery costs.
Posted 6-19-10    to be removed 12-19-10

Machine: Gammill Classic Plus, 12 foot table
Location: Grayslake, IL
Price: $14,500
Contact: kathyave@comcast.net
This is a beautiful, barely used, 2009, DC 26-10 Classic Plus Gammill Quilting System (with stitch regulator) including the 12 foot table with pivot feature and light bar. Included in the sale are many patterns, cones of thread, and stand alone bobbin winder. Purchaser is responsible for pickup, transportation and delivery costs.
Posted 6-19-10    to be removed 12-19-10

Machine: Gammill with Statler Stitcher, 12 foot table
Location: Vicksburg, MS
Price: $27,500.00
Contact: dianemjordan@aol.com
This machine is 20 months old and was purchased new. Includes hydraulic lift, light bar and $4,000.00 worth of patterns. Purchaser  responsible for transportation and set-up
Posted 5-28-10           Top be removed 11-28-10

Machine: Gammill Classic Plus, 12 foot table
Location: Mapleton MN
Price: $10,900.00
Contact: davisfor@hickorytech.net
2001 Gammill Classic Plus, 12 foot table, stitch regulator, laser light,  work station, EdgeRider wheels and original wheels, instruction manual. Excellent condition. Buyer responsible for transportation and set-up
Posted 5-28-10           Top be removed 11-28-10.

Machine: APQS Millennium, 12 foot table
Location: Seattle, WA
Price: $11,000  Price Reduced to $9,000!!
Contact: magster99@hotmail.com
Purchased in 2005 and is gently used. Price includes lots of extras. Purchaser is responsible for all transportation and shipping charges.
Posted 4-26-10                 To be removed 10-26-10

Machine: Gammill Classic, 14 foot table
Location: Omaha, NE
Price: $6,500 Price Reduced to $5,000!!
Contact: cketner@windstream.net
Mid1990s Gammill Classic with upgraded machine head, custom 14 foot table with batting bar and includes pantographs, cones of thread, and batting. Used for light commercial use and regularly maintained and is in excellent condition. Buyer is responsible for moving or shipping from Omaha, Nebraska.
Posted 4-26-10                 To be removed 10-26-10

Item: CompuQuilter Computerized Quilting System
Location: Manteo, NC
Price: $10,000
Contact: ehyland3427@embarqmail.com
I am selling my CompuQuilter system as I am moving and I cannot take with me.  I have enjoyed the CompuQuilter for two years now and have quilted many beautiful quilts.  The system is so easy to learn and use.  Stitches come out beautiful with little thread breakage.  Comes with Flat screen monitor, keyboard, complete manual and latest version.  CompuQuilter Co. will recognize you as new owner. Purchaser is responsible for pickup and transportation costs.
Posted 4-20-10     to be removed 10-20-10

Machine: Gammill Classic Plus, 12 foot table
Location: Iron Mountain, MI
Price: $10,000 or best offer
Contact: zolnerbunny@yahoo.com
This machine is 6 years old and the price includes numerous cones of thread, 62 pantographs and several CD’s. The machine has a stitch length regulator and is in perfect condition. Everything that was included with the original sale is included in the price. Purchaser is responsible for taking down and transportation. I'm retiring and moving to another state and I can’t take my machine with me.
Posted 3-29-10               To be removed 9-29-10

Machine: Gammill Classic, 12 foot table
Location: Estacada, OR
Price: $7,500.00
Contact: Email only: currinrd@yahoo.com
Gammill Classic 12 foot table does not have stitch regulator. 8 or 9 years old, lightly used, has had yearly service and new tires for carriage. Includes laser light and lots of pantograph patterns, video, instruction books and thread. Email if interested or questions. Purchaser is responsible for shipping and transportation costs.
Posted 3-14-10        to be removed 9-14-10

Do you have a machine you'd like to sell?

Email us and we will list it for you!
Have you sold your machine listed above?
Click here to remove your listing.

Since April 7, 2009 you are visitor number